Air Drills / Accessories

589A Hand Held Guide 

A hand held guide to keep drills and taps 90 to the skin surface. The guide assembly consists 
of a clear plastic housing and a special screw in type hardened steel bushing. Bushings can be 
interchanged in one housing within the sizes indicated #40 thru 11/32" on the ordering chart.

                   

---

589DA & 589EA Hand Held Guides

---

Terry No. "O" Midget Right Angle Drilling Attachment 

> With 10-32 threaded drill spindle
> Capacity - 1/8"




The smallest industrial angle tool known. Engineered particularly for drilling or countersinking 
inside holes as small as 15/16" diameter and as close as 7/32" from center to shoulder. 

---

Terry 1-1 Small Right Angle Drilling Attachment 

> With 5/16"-24 or 1/4"-28 threaded spindle
> Capacity - general use - 1/8" maximum - 3/16"
> "THE SMALL TOOL WITH THE BIG THREAD" 

---

Terry 1-1 Small Right Angle Drilling Attachment

> With 3/16" capacity Jacobs Chuck and Key

---

Terry No. 3 Right Angle Drilling Attachment

> With 1/4"-28 threaded spindle
> Capacity - 1/4" general use, 5/16" maximum




This Terry Standard Duty Right Angle is the twin of the No. 2, designed for use with 
threaded shank drills or with straight drills in Drill Adapters.

---

Terry No. 4-1 Small Adjustable Offset Drilling Attachment

> With 1/4"-28 or 5/16"-24 threaded spindle
> Capacity - 3/16" maximum

---

Terry No. 345 - 45° Angle Drilling Attachment

> With 1/4"-28 threaded spindle
> Capacity - 1/4"


 

---

3K Angle Drill Attachment Kit

> Includes #40, 30, 21, 10 threaded drills and #3 attachment in box

---

Replacement Chucks With Keys

> 3/8" - 24 thread

---

Quick Change Chuck

---

Terry No. N6 Straight Flexible (Snake) Drilling Attachment

> With 1/4" - 28 threaded spindle

---

Terry No. N51-1 Right Angle Flexible Drilling Attachment

> With 1/4" - 28 threaded spindle

---

Terry No. N63 Right Angle Flexible Drilling Attachment

> With 1/4" - 28 threaded spindle
> A combination of the No. 3 Right Angle Head Assembly from the Terry No. 3

---

Terry No. 70 Geared Type 45° (Pork Chop) Drilling Attachment

> With 1/4" - 28 threaded spindle

---

Terry No. T25 Flat Offset Drilling Attachment (Short Handle)

> With 1/4" - 28 threaded spindle




The 2-5/16" offset gives greater access to tight places. Needle Bearings in the Handle, Hardened 
Alloy Steel Drive Shaft and Gears make this a most durable tool.

---

Terry No. T235 Flat Offset Drilling Attachment (Long Handle)

> With 1/4" - 28 threaded spindle

---

Terry No. T235 Flat Offset Drilling Attachment (Long Handle)

> With 1/4" - 28 threaded spindle

---

R18A & R10A Jobbers Length 118° S/P High Speed Steel Drill Bits 

> Per NAS907 Specifications

---

501-6 & 500-6, 6" Aircraft Extension High Speed Steel Drill Bits 

> Per NAS907 Specifications

---

501-12 & 500-12, 12" Aircraft Extension High Speed Steel Drill Bits 

> Per NAS907 Specifications

---

R41C & R40C Screw Machine "Shortie" High Speed Steel Drill Bits 

> Per NAS907 Specifications

---

R18C & R10C Jobbers Length Cobalt Drill Bits 

> Per NAS907 Specifications, Type J

---

CO501-6 & CO500-6, 6" Cobalt Aircraft Extension Drill Bits 

> Per NAS907 Specifications, Type J

---

CO501-12 & CO500-12, 12" Cobalt Aircraft Extension Drill Bits 

> Per NAS907 Specifications, Type J

---

C Series High Speed Steel, Jobbers Length Drill Bit Set  

> Per NAS907 Specifications

---

C Series Cobalt Jobbers Length Drill Bit Set  

> Per NAS907 Specifications, Type J

---

"Easy Outs" Screw Extractor Sets 

> Per NAS907 Specifications

---

K Series Drill Stops 

---

06 Series Pilot Brushes 

---